Page 1 of 3 123 LastLast
Results 1 to 15 of 38

Thread: EEhack

  1. #1
    Fuel Injected! Stroked 388's Avatar
    Join Date
    Jan 2017
    Age
    51
    Posts
    114

    EEhack

    Hello everyone a little new to the tuneing world. I tried using EEhack for the first time my 94 T/A LT1 be for that I used tuner cat. The problem I have I tweaked my injector pulse width alittle because of a cam swap so I loged the car made my change and re uploaded to the ECU now my LTrim left and right are locked at 128 am I missing something. Thanks for any information Gary

  2. #2
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    you definitely changed something else.

    what emissions controls did you disable?

    what xdf are you using?

    there are various conditions that must be met for blm and cl to enable.

    are either of the cl or blm indicators coming on in eehack? post your bin and/or log and ill have a look...

    also welcome aboard

  3. #3
    Fuel Injected! Stroked 388's Avatar
    Join Date
    Jan 2017
    Age
    51
    Posts
    114

    log file

    Hey Steve I love the program you made 100 times better that the one I use to start with. It is very possible I did do something or not did something right. I use Tunepro to log as you suggested. I will send you my log. If you don't mind looking at it that would be great. ill attach the bin if I can figure it out. Thanks Gary
    Last edited by Stroked 388; 01-17-2017 at 01:18 AM. Reason: need to add tune log

  4. #4
    Fuel Injected! Stroked 388's Avatar
    Join Date
    Jan 2017
    Age
    51
    Posts
    114
    No CL or BLM are not coming on all I changed was the injector plus width. But as with all new toys I was checking everything out and it is very possible I did do something. so I loaded the last tune back in with tunercat and still no Blm readings they were stuck at 128. I thought by putting the old tune bask in would fix it but it did not. Thanks Steveo

  5. #5
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    lets see a log?

    it should go into closed loop if:
    - the closed loop min. time has passed
    - the o2s are 'ready'
    - the coolant temperature threshold has passed

    is it possible it's not getting hot enough?

    this could be a coincidence unrelated to you changing bins...

  6. #6
    Fuel Injected! Stroked 388's Avatar
    Join Date
    Jan 2017
    Age
    51
    Posts
    114
    I should be getting hot enough 163* it would switch before that before. I know its something I must of changed just cant put my finger on it ill post a run log I did the other day its about 4 minutes long just to warm it up. Just tried to upload the eedata file it wont let me. Any other way to get it to you ? Sorry Steve just not use to uploading on forums or just not very good at it lol thanks again Gary

  7. #7
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    you can upload a .zip file i think just try zipping it.

    zipping the log and the bin you were running at the time would be good practice for getting help on a forum like this...

  8. #8
    Fuel Injected! Stroked 388's Avatar
    Join Date
    Jan 2017
    Age
    51
    Posts
    114
    hope this works lol. Thanks a lot Steveo for taking the time out of your day to help someone new to the tuning world.......Thanks Gary

  9. #9

  10. #10
    Fuel Injected! Stroked 388's Avatar
    Join Date
    Jan 2017
    Age
    51
    Posts
    114
    Thanks much appreciated

  11. #11
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    seems a lot has been changed in that bin but i don't see anything specifically that should prevent closed loop.

    take a datalog with eehack and post that

  12. #12
    Fuel Injected! Stroked 388's Avatar
    Join Date
    Jan 2017
    Age
    51
    Posts
    114
    Wasn't the one I sent you a running Eehack log ?

  13. #13
    Fuel Injected! Stroked 388's Avatar
    Join Date
    Jan 2017
    Age
    51
    Posts
    114
    here is a the eehack run data log

  14. #14
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    your o2 sensors are not doing well. they are both parked at 450mv from cold start.

    open the graph window and select 'left oxygen sensor volts' and 'right oxygen sensor volts'.

    a healthy o2 will start at high voltage (900+mv) and as the exhaust temperature rises, start to dip a bit. then the car goes into closed loop.

    your o2s are never 'becoming ready'.

    see attached graph

  15. #15
    Fuel Injected! Stroked 388's Avatar
    Join Date
    Jan 2017
    Age
    51
    Posts
    114
    Wow didn't pay no attention to that they look like they are dead. I will have to check wiring. Maybe dead o2. That could be the reason it won't go in to close loop and are stuck at 128 BLMs ? Thanks Steveo I'll go take look and see what I find I'll let you know

Similar Threads

  1. '94 LT1 EEHack analysis using WB
    By babywag in forum GM EFI Systems
    Replies: 17
    Last Post: 09-11-2022, 11:38 AM
  2. EEHack target afr
    By Terminal_Crazy in forum GM EFI Systems
    Replies: 4
    Last Post: 12-04-2016, 06:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •