EEhack

[Stroked 388]

Hello everyone a little new to the tuneing world. I tried using EEhack for the first time my 94 T/A LT1 be for that I used tuner cat. The problem I have I tweaked my injector pulse width alittle because of a cam swap so I loged the car made my change and re uploaded to the ECU now my LTrim left and right are locked at 128 am I missing something. Thanks for any information Gary

[steveo]

you definitely changed something else.

what emissions controls did you disable?

what xdf are you using?

there are various conditions that must be met for blm and cl to enable.

are either of the cl or blm indicators coming on in eehack? post your bin and/or log and ill have a look...

also welcome aboard

[Stroked 388]

Hey Steve I love the program you made 100 times better that the one I use to start with. It is very possible I did do something or not did something right. I use Tunepro to log as you suggested. I will send you my log. If you don't mind looking at it that would be great. ill attach the bin if I can figure it out. Thanks Gary

[Stroked 388]

No CL or BLM are not coming on all I changed was the injector plus width. But as with all new toys I was checking everything out and it is very possible I did do something. so I loaded the last tune back in with tunercat and still no Blm readings they were stuck at 128. I thought by putting the old tune bask in would fix it but it did not. Thanks Steveo

[steveo]

lets see a log?

it should go into closed loop if:
- the closed loop min. time has passed
- the o2s are 'ready'
- the coolant temperature threshold has passed

is it possible it's not getting hot enough?

this could be a coincidence unrelated to you changing bins...

[Stroked 388]

I should be getting hot enough 163* it would switch before that before. I know its something I must of changed just cant put my finger on it ill post a run log I did the other day its about 4 minutes long just to warm it up. Just tried to upload the eedata file it wont let me. Any other way to get it to you ? Sorry Steve just not use to uploading on forums or just not very good at it lol thanks again Gary

[steveo]

you can upload a .zip file i think just try zipping it.

zipping the log and the bin you were running at the time would be good practice for getting help on a forum like this...