Page 4 of 4 FirstFirst 1234
Results 46 to 55 of 55

Thread: 6.5 diesel .xdf and adx

  1. #46
    Fuel Injected! brian617's Avatar
    Join Date
    Apr 2013
    Location
    Arkansas
    Age
    45
    Posts
    711
    Anyone done any turbo boost table tuning on one of these trucks? I would like to at some tables to see where changes where made.
    89 K1500 Scottsdale 5.7L 5spd 3:42 RamJet cam Dart iron TBI heads 427 PCM swap
    95 C2500 Cheyenne 6.5L turbo diesel 4L80e 4:10 DB2-4911 Manual pump conversion 0411 PCM trans control 2Bar COS
    05 Outback XT 2.5L turbo gas auto

  2. #47
    Carb and Points!
    Join Date
    Sep 2012
    Posts
    7
    Quote Originally Posted by newellshk View Post
    I can't really give any suggestions about the warm starting. I would imagine that any combination of imperfect injectors, injection pump, pump timing, batteries, starter, etc would progressively cause harder starting, and adding fuel and/or timing might help in some cases. I would think that it would be safe to add 10-20% fuel to that table in the temp ranges you are targeting and see what happens.

    I will try to find some time in the near future to look at the code that deals with starting and work to expand the tables/scalars and documentation for them. Maybe then I can give some better suggestions, but keep in mind I'm not an experienced diesel tuner.
    This is very accurate. Most cold start issues are due to injectors and pump wear. You can add pulse width and basic timing advance during cranking but you are just masking mechanical issues 99% of the time. Poor atomization from old injectors on these is usually the problem. And shoving more fuel in at 22:1 compression on a cold start doesn't fix it. If you have good parts and lowered compression, having to make changes is a different story.

  3. #48
    Carb and Points!
    Join Date
    Sep 2012
    Posts
    7
    Quote Originally Posted by newellshk View Post
    It isn't 0-4800 rpm. The column variable is L00B5 which I haven't had time yet to decipher the math behind, but I have started working on it. There are also the tables at 557A, 558C, 559E (labeled CAL_CRANK_SEP_TIME_2, CAL_CRANK_PILOT_PW, CAL_CRANK_SEP_TIME), along with the constants above them, only some of which are labeled. I have those tables added to my xdf but I am still working on understanding them. The hack is really more like a bunch of hints because I've already found things that are incorrect, along with a ton that are labeled but the code isn't properly commented.

    I should be able to get another iteration of the xdf posted by tuesday with most of the startup stuff added and at least partially documented.
    Don't waste time on the pilot injection stuff. It's not fully implemented in the stock code.

  4. #49
    Fuel Injected! brian617's Avatar
    Join Date
    Apr 2013
    Location
    Arkansas
    Age
    45
    Posts
    711
    Quote Originally Posted by quadstar87 View Post
    Don't waste time on the pilot injection stuff. It's not fully implemented in the stock code.
    Got any boost table tips, or tables you might be willing to share? Be glad to post my .bin if you wanted to see my work.
    89 K1500 Scottsdale 5.7L 5spd 3:42 RamJet cam Dart iron TBI heads 427 PCM swap
    95 C2500 Cheyenne 6.5L turbo diesel 4L80e 4:10 DB2-4911 Manual pump conversion 0411 PCM trans control 2Bar COS
    05 Outback XT 2.5L turbo gas auto

  5. #50
    Fuel Injected!
    Join Date
    Jan 2016
    Age
    41
    Posts
    48
    Here is a new XDF.

    Added Transmission Tables:
    Kickdown Shift MPH
    Downshift Modifer vs APP
    Upshift Modifer vs APP
    Cold Engine Prevent Overdrive CTS thresholds

    I haven't fully figured out the usage of the modifier tables but they are all set to zero in the bins I have.
    Attached Files Attached Files

  6. #51
    Fuel Injected!
    Join Date
    Jan 2016
    Age
    41
    Posts
    48
    And another.

    Added Kickdown Mode Enable/Disable vs APP
    Re-added checksum correction that somehow was lost.
    Attached Files Attached Files

  7. #52
    Carb and Points!
    Join Date
    Jul 2019
    Age
    38
    Posts
    2
    hi i was wondering if you still any of the files for 1995 6.5 diesel to get into the pcm. im running tunerpro rt.

  8. #53
    Carb and Points!
    Join Date
    Aug 2018
    Posts
    2
    Stevtatt07: Sorry I replied to you on another forum and pointed you to this thread, didnt realize you were already here. My mistake.

    What can we help you with? the xdf you need is in the post above your's, the BPAA bin? you can get it from dripspeed or read your own, mine wasnt a BPAA so I just grabbed it from dripspeed, its a good bin and works.

    UDL

  9. #54
    Carb and Points!
    Join Date
    Jul 2019
    Age
    38
    Posts
    2
    oh ok im not sure how i missed that thank you.

  10. #55
    Fuel Injected!
    Join Date
    Apr 2020
    Location
    Belarus
    Age
    35
    Posts
    152
    I'm searching for BIN file

    4056
    BKWB
    3342

    I've found 6.5 diesel bin files collection somewhere, but i've lost it :(
    Can anybody help me?
    PCM 16183977

    Can I use BPDP instead of mine bin? (Blazer '94 2dr)
    Last edited by yoheer; 09-06-2020 at 05:28 PM.

Similar Threads

  1. Obdii diesel bin??
    By 92rslt1 in forum Other EFI systems and related topics
    Replies: 0
    Last Post: 07-16-2014, 06:54 PM
  2. GM ECM 16212488 code EC (diesel 4L80E)
    By alex1234 in forum GM EFI Systems
    Replies: 0
    Last Post: 04-23-2014, 11:15 PM
  3. GM ECM 16183977 code EC (diesel 4L80E)
    By daleulan in forum GM EFI Systems
    Replies: 2
    Last Post: 04-18-2014, 11:10 AM
  4. 97 vortec into a 86 diesel truck
    By j20m715 in forum GM EFI Systems
    Replies: 6
    Last Post: 10-26-2013, 07:20 AM
  5. 6.5 diesel ecm insides
    By Playtoy_18 in forum GM EFI Systems
    Replies: 5
    Last Post: 10-01-2013, 01:51 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •