Here is a work in progress xdf. I have found that it matches all bins that I have except BRMM which is odd because it does have an EC mask. Anyone have any idea why a bin with the same mask has a different calibration layout, and any good ways to detect that (or inform the tunerpro user how to easily and confidently check). Maybe the BRMM bin is from an already modified memcal done by a 3rd party vendor...
I have successfully used this xdf to modify shift points, fuel, and base timing (starting with a stock BPBS bin), so I know that the checksum etc works.
It's still fairly basic at the moment but does have a lot of the common stuff that one would want to change. If anyone has any requests please speak up and I'll do what I can. I do plan to continue to expand it so expect updates in the next few weeks. It doesn't currently have any EGR stuff except for the DTC enable flags. I also haven't yet added a way to modify the pump calibration tables (or emulate changing the resistor), but I'm not sure if that's very useful since you can change base timing and base fuel.
If someone with permission wants to copy the xdf to:
http://www.gearhead-efi.com/Fuel-Inj...C-Turbo-Diesel
that would be cool.
Admin note: XDF and disassembly also located at:http://www.gearhead-efi.com/Fuel-Inj...ll=1#post64990
Reply With Quote
Bookmarks