Considering an engine swap upgrade

[Kudzu]

I have an 93 Suburban, 350, electronic shift transmission (sorry but I forget the designation). I am hearing a bearing knock till the oil pressure picks up so I I am looking at options to replace it. Seriously considering a Chevrolet Performance long block or the 12530283 4 bolt. Both are Vortec truck engines.

I have gone through a lot of ideas to build an engine but I need something I jump in, hook up the trailer and drive a 500+ miles. So I am leaning toward stock crate engine and this should provide more HP and torque than the stock engine, which the Suburban could really use. I know a lot of people use a the Vortec head so that is not really something new, just new to me.

Done a lot of reading and know pretty much what it will take to get it work with TBI. Probably use a carb intake with adapter plate for the TBI and skip the EGR. Replace fuel pump and regulator. MIGHT go with short tube headers but now sure there is any real gain over manifolds for a highway cruiser. It has been a lowered so I am NOT interested in long tube headers! Do not want to deal with them get hung up and having to do a replacement in a parking lot.

With all said, my concern is the tuning. I could learn tuning, buy the hardware, that doesn't scare me but frankly I would rather not. It would probably be a one time deal. Once I get the swap done and tuned I wouldn't use that skill for a long time and would probably forget most of it.

So, any chance there is a chip available that would work with this combination I have in mind? I am assuming not and would prefer to just have someone else do the tuning for me.

[left] I live near Huntsville, AL and I have not found anyone that tunes the older systems. So am I going to have to do this myself of is there someone out there than can 'mail order' tune it? Frankly that kind of concerns me given some of the horror stories I have read. Seems like if you not in the car, it would be hard to tune one. Thanks!