Results 1 to 3 of 3

Thread: Anyone willing to program a few chips with stock bins for me?

  1. #1
    Fuel Injected!
    Join Date
    Jun 2015
    Age
    36
    Posts
    354

    Anyone willing to program a few chips with stock bins for me?

    My eprom programmer won't do (that I've found so far) the AN28F256-120 flash chips that my P66 ECM uses. I've socketed the one I bricked, and have located a few good pulls. Anyone here willing to flash them with the stock bins?

    Hopefully I'll get the programmer working with these chips soon enough, I'm just looking for a quick solution to get the truck project rolling again.

    EDIT: Also, will AN28F512-120 chips work? I have about a pint of those, pulled from old boards at work. Same board I pulled the sockets from, actually.
    Last edited by Xnke; 12-21-2016 at 09:07 PM.

  2. #2
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,470
    I tried the 512 in that PCM but they don`t work.
    One more data pin is used. I didnt dig deeper to make them work, maybe board modification is needed.
    If you can program 512 I doubt you can`t do 256 with the same programmer.
    You can give it more tries.

  3. #3
    Fuel Injected!
    Join Date
    Jun 2015
    Age
    36
    Posts
    354
    Yeah, my programmer wont' do any of the 28F series chips, it's OOOOOLLLLLDDDDD. I built it from a kit in the mid 90's. I'll look around and see if I have a different one, I *might* have another.

Similar Threads

  1. I have some L.O. and H.O. 2.3l quad-4 stock bins
    By BigBanks78 in forum GM EFI Systems
    Replies: 7
    Last Post: 09-15-2015, 01:40 PM
  2. Stock computer/Stock tune Datalogging?
    By rstroh in forum GM EFI Systems
    Replies: 16
    Last Post: 03-07-2015, 04:46 AM
  3. ok ? wanted to see if anyone can program and how much?
    By 78monte in forum GM EFI Systems
    Replies: 34
    Last Post: 10-12-2014, 08:25 PM
  4. wanting to learn to program efi
    By injected67camaro in forum Introductions
    Replies: 6
    Last Post: 09-02-2014, 04:24 AM
  5. Reading Stock GM Chips Burn 1, Burn 2, AutoProm TunerPro Flash and Burn
    By EagleMark in forum Fuel Injection Writeups Articles and How to New and Old
    Replies: 0
    Last Post: 01-27-2013, 08:15 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •