Results 1 to 6 of 6

Thread: 411 into Chev 1989 K1500 questions.

  1. #1
    Fuel Injected!
    Join Date
    Sep 2014
    Posts
    126

    411 into Chev 1989 K1500 questions.

    Hi have most of the parts to run a 24X 411 on a SBC gen1 OBD1, looking for advances in ignition control with coil per cylinder. If I had done more research I may have gone a different way- but the hole is deep now;)- existing 7747 style DynamicEFI EBL Flash- pretty much a standalone, truck was converted from TBI to port TPI- batch.- 700r4- this is giving me a 411 lock up application problem.Installed EFI Connection's 24X reluctor and timing cover, have all major parts. BUT the 411 won't control older style lockup and I really don't want to spend for a 4L60E as the 700r4 has all the good parts.- leave 700r4 as is, it is well built and so far reliable.- leave 7747 as is- share TPS, MAP, VSS between 7747/411, 7747 to control converter lock up (not ideal sharing sensors, I know- a second MAP could be added)- cruise, leave with 7747- iac to 411- ac control to 411 (iac/e fans)- temp to 411- e fans to 411- tach from 411- oil pres senor to 411?- PRND trans status? Needed?- can 411 log WB O2?What's your thoughts?

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,264
    Have you considered a TransGo Hydraulic Lockup Kit http://www.transgo.com/products.php?...dcountview=Yes Special Instructions: DOES NOT require transmission removal for proper installation. dave w

  3. #3
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Euless, TX
    Posts
    2,305
    Quote Originally Posted by dave w View Post
    Have you considered a TransGo Hydraulic Lockup Kit http://www.transgo.com/products.php?...dcountview=Yes Special Instructions: DOES NOT require transmission removal for proper installation. dave w
    ^^ Suggested this to him on another site.My old 1983 G20 used a vacuum switch hooked to ported vacuum to lock 2nd and 3rd and a pressure switch to lock 4th.
    Last edited by Fast355; 12-21-2016 at 05:17 AM.

  4. #4
    Fuel Injected!
    Join Date
    Oct 2013
    Posts
    1,022
    Does that just lockup the converter in overdrive? that kind of setup sucks compared to having control of the TCC.

  5. #5

  6. #6
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Euless, TX
    Posts
    2,305
    Quote Originally Posted by lionelhutz View Post
    Does that just lockup the converter in overdrive? that kind of setup sucks compared to having control of the TCC.
    Yes it does....I personally liked the vacuum switch setup in my old 1983 G20.

Similar Threads

  1. Tuning '94 chev Suburban Big Block
    By rsicard in forum Fuel Injection Writeups Articles and How to New and Old
    Replies: 90
    Last Post: 07-19-2019, 04:47 PM
  2. 1993 Chev MPI 383
    By Gaz in forum GM EFI Systems
    Replies: 7
    Last Post: 09-21-2018, 11:55 PM
  3. 2.8 chev crossover to newer 4.3
    By misfit in forum Introductions
    Replies: 2
    Last Post: 07-01-2015, 02:55 PM
  4. Replies: 8
    Last Post: 05-13-2015, 07:21 AM
  5. '71 Chev pick up 4L60E swap.
    By Six_Shooter in forum Gear Heads
    Replies: 13
    Last Post: 12-13-2013, 05:28 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •