Results 1 to 13 of 13

Thread: Problems tuning TunerproRT V5 VE Table and Cell Trace 1990 corvette

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    Fuel Injected!
    Join Date
    Nov 2016
    Posts
    67
    Two issues going on it it's running really rich during warm up and if I drive it not fully warm yet. it seems to ignore the VE maps until it's warm, I tried adjusting the VE map while warming up to no avail. Where is it getting information from during warm up? Last week when it was warmer outside it would idle well after warmed up around 14.7-15.5 AFR. Now that it's a little cooler outside it idles rich around 10.5-11.2.
    Last edited by Turbo Nasty; 12-20-2016 at 11:11 AM.

Similar Threads

  1. 1990 Corvette Starts then dies
    By Turbo Nasty in forum GM EFI Systems
    Replies: 3
    Last Post: 11-21-2016, 03:35 AM
  2. Need L98 350 Corvette S/A Table
    By Cartrax in forum GM EFI Systems
    Replies: 0
    Last Post: 11-08-2016, 01:04 AM
  3. Looking for input on tuning BLM Cell Boundaries
    By johnny_b in forum GM EFI Systems
    Replies: 6
    Last Post: 05-04-2016, 11:52 PM
  4. 1990 highly modified 434 corvette tune issue
    By bjankuski in forum GM EFI Systems
    Replies: 1
    Last Post: 07-16-2015, 08:40 AM
  5. 1990 Corvette (Y Body) ADX File?
    By C4ProjectCar in forum GM EFI Systems
    Replies: 6
    Last Post: 12-08-2014, 09:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •