TunerPro comprehensive XDF for 0411 PCM - with Checksums

[woody80z28]

I'm using TunerPro and LS-Droid and have been tuning a couple different P01 and P59 computers with success.

However, I've enabled Power Enrichment for my 2001 8.1 with 8322 OS, but it will not activate. I see in HPTuners there are two fields that are missing in the 8322 XDF: 2413 Enable Torque % and 2414 Enable Torque % Hysteresis. Is there any way to get these added? I'm guessing these are why PE won't enable, even though I've eliminated the delay and dropped the TPS% enable.

Any help would be amazing. It kills me to see my wideband at 14.8-15.0 at WOT! Thanks

[cgw]

I'm in the same boat with an 8.1 on 6125, I'm trying to get PE working, as well as kill off some of the torque cut on shifts and on launch

[Norm]

Hello,
I used this XDF to tweak a 0411 ECU with the 8322 OS. Worked ! thanks.
One thing I cant find is MAP sensor calibration. Linear and offset. (as HP tuners calls them)