Ok thanks for that didn't realise they were for that OS I seen a different title, thanks again.
Definately a lot of work wanted to see where you started to appreciate it even more. I don't have the skills tobdi it myself so thanks for your efforts.
Ok thanks for that didn't realise they were for that OS I seen a different title, thanks again.
Definately a lot of work wanted to see where you started to appreciate it even more. I don't have the skills tobdi it myself so thanks for your efforts.
Hi LRT,
Awesome work! Any chance of being able to add Lean Cruise related parms to the xdf? EFI Live defines the enable/disable flag as {B9100}, and the tuning config pieces are {B3634}, {B3635}, {B3636}, {B3637}, {B3638}, {B3639}, {B3646}.
Thanks for all the work.
Jahajazz
Lean cruise that'd be real nice, didn't notice it was missing untill now.
Would anybody have a 01250001 based BIN file they could share? A stock one would be ideal. That's a MAF less version of OS 12202088 COS1
Any help appreciated
....
Last edited by LRT; 05-24-2021 at 11:21 PM.
I'm using TunerPro and LS-Droid and have been tuning a couple different P01 and P59 computers with success.
However, I've enabled Power Enrichment for my 2001 8.1 with 8322 OS, but it will not activate. I see in HPTuners there are two fields that are missing in the 8322 XDF: 2413 Enable Torque % and 2414 Enable Torque % Hysteresis. Is there any way to get these added? I'm guessing these are why PE won't enable, even though I've eliminated the delay and dropped the TPS% enable.
Any help would be amazing. It kills me to see my wideband at 14.8-15.0 at WOT! Thanks
80 Camaro Z28 - 550hp AFR 383 / T56 6spd (Holley HP EFI)
91 Beretta "SS" - 260hp 3400 MPFI / HM282 5spd (7730/$A1) sold! for crazy money...but I miss it
94 Silverado Z71 - 300hp Vortec 357 TBI / NV4500 5spd (7427/$0D) gone but not forgotten
96 Beretta "T56" - 4.8 LS RWD swap / 6spd (0411/2156)
01 Silverado 2500HD - stock Vortec 8.1 / ZF6 6spd (0411/8322)
https://www.youtube.com/c/GEARHEADdezign
I'm in the same boat with an 8.1 on 6125, I'm trying to get PE working, as well as kill off some of the torque cut on shifts and on launch
Hello,
I used this XDF to tweak a 0411 ECU with the 8322 OS. Worked ! thanks.
One thing I cant find is MAP sensor calibration. Linear and offset. (as HP tuners calls them)
Hi There!
Im sorry if this is a silly question, but im struggling to find in this thread where to download the XDF and DLL files?
Dave
The DLL file that you seek is on the Tuner Pro RT web site. The XDF files are spread out here on Gearhead-EFI, the PCMHacking.net site, the LS1Tech site and a github repository.
Which XDF are you seeking?
Rick
1970 Chevy El Camino, LM7 Engine, 4L60E - Two 896 and two 0411 PCM's
Thanks Rick for the reply.
I’ve been searching for the XDF to go with OS 12202088. This thread speaking specifically to that OS in the first post, but I haven’t been able to find the download link.
I’ve also done a bit of searching, without much luck.
Sorry mate, still a bit new to this so orogdbly don’t have the same artillery as you guys.
Dave
Hi,
The original links had been removed for an unexplained reason. Here is 12202088.
http://www.gearhead-efi.com/Fuel-Inj...S1-PCM-Project
Cheers mate! I just had a read of that thread, and i may be missing something. I cant seem to find the 12202088 XDF file. I can see 12202088.7z.zip, however when opening that archive, the only file inside is a .ASM file.
I also had a look in the 2500sXDFs.zip file in that thread, but no reference to the XDF file im looking for that i can easily see.
Are you able to provide any pointers?
Dave
Something is not right with that 2088 XDF. Send me a PM with your regular email account and I will send you the 2088 XDF that I use.
Rick
1970 Chevy El Camino, LM7 Engine, 4L60E - Two 896 and two 0411 PCM's
Bookmarks