TunerPro comprehensive XDF for 0411 PCM - with Checksums

[Dylan]

Thanks for that, I downloaded that link and it has the disassembly info in a .asm file, no XDF's

You mentioned you combined and added to some existing XDF's for this OS was wondering if the originals were still around.

[LRT]

....

[Dylan]

Ok thanks for that didn't realise they were for that OS I seen a different title, thanks again.

Definately a lot of work wanted to see where you started to appreciate it even more. I don't have the skills tobdi it myself so thanks for your efforts.

[jahjazz]

Hi LRT,

Awesome work! Any chance of being able to add Lean Cruise related parms to the xdf? EFI Live defines the enable/disable flag as {B9100}, and the tuning config pieces are {B3634}, {B3635}, {B3636}, {B3637}, {B3638}, {B3639}, {B3646}.

Thanks for all the work.

Jahajazz

[Dylan]

Lean cruise that'd be real nice, didn't notice it was missing untill now.

[Dylan]

Would anybody have a 01250001 based BIN file they could share? A stock one would be ideal. That's a MAF less version of OS 12202088 COS1

Any help appreciated

[LRT]

....

[woody80z28]

I'm using TunerPro and LS-Droid and have been tuning a couple different P01 and P59 computers with success.

However, I've enabled Power Enrichment for my 2001 8.1 with 8322 OS, but it will not activate. I see in HPTuners there are two fields that are missing in the 8322 XDF: 2413 Enable Torque % and 2414 Enable Torque % Hysteresis. Is there any way to get these added? I'm guessing these are why PE won't enable, even though I've eliminated the delay and dropped the TPS% enable.

Any help would be amazing. It kills me to see my wideband at 14.8-15.0 at WOT! Thanks

[cgw]

I'm in the same boat with an 8.1 on 6125, I'm trying to get PE working, as well as kill off some of the torque cut on shifts and on launch