Results 1 to 3 of 3

Thread: TYunerpro and AEM WB O2

  1. #1
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    63
    Posts
    98

    TYunerpro and AEM WB O2

    I have a 7727 ecm in my 90 vette and would like to hook up a wide band and data log via Tunerpro how do I go about hooking up the wideband to work with TP I am data loging via aldl cable and will be using this WB O2. https://www.amazon.com/AEM-30-4110-U...14YQVMHSDEPJX8

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Maybe this thread will help: http://www.gearhead-efi.com/Fuel-Inj...2328#post62328 Post #2 dave w

  3. #3
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    63
    Posts
    98
    I remember reading somewhere that I could use the wire from the oil temp sensor that goes into the ecm and the just make changes in TP, I will have to do a search on it. I realy do not want to mod the ecm.once I am done data loging with the wide band I could just change it back or better yet some how use an open port on the aldl connector.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •