Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 5 of 5

Thread: 0411 beating the horse

  1. #1
    Fuel Injected! babywag's Avatar
    Join Date
    Dec 2011
    Posts
    193

    0411 beating the horse

    So, read many threads scattered here and there regarding replacing flash. Threads about trying to make the flash removable w/ a socket.

    Would something like this work?
    http://www.chip-service.de/product_i...0yamaichi.html
    Tony
    Looking to buy TunerCat OBDII
    '88 Jeep Grand Wagoneer (aka Babywag) and '90 Jeep Grand Wagoneer (aka JUNKbucket) both fuel injected
    '94 Caprice Wagon

  2. #2
    Fuel Injected! babywag's Avatar
    Join Date
    Dec 2011
    Posts
    193
    Anybody know of a US supplier for this? Cannot seem to find one.Debating buying a Moates roadrunner header, and making a pcb for it...anybody have any experience designing a pcb?
    Tony
    Looking to buy TunerCat OBDII
    '88 Jeep Grand Wagoneer (aka Babywag) and '90 Jeep Grand Wagoneer (aka JUNKbucket) both fuel injected
    '94 Caprice Wagon

  3. #3
    Fuel Injected! JeepsAndGuns's Avatar
    Join Date
    Sep 2011
    Location
    alabama
    Age
    34
    Posts
    1,666
    http://www.gearhead-efi.com/Fuel-Inj...in-a-OBDII-PCM

    There is 13 pages where we talk about it. But it looks like it has fizzled out.

    See post #165 on page 11. I still think something like that could work.

    My idea: Buy two 411 ecm's. Cut a hole in one, do what I talk about in the above mentioned post. Tune ecm till you get it where you want it, then take the other one apart, remove chip, reprogram, then solder back in place and close back up. Now you have a tuned and sealed 411. Then just keep the other one if you need or want to tune some more. But what chip burner and software to use?
    79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy

    93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver

    99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.

  4. #4
    Fuel Injected! babywag's Avatar
    Join Date
    Dec 2011
    Posts
    193
    I think that's a little cluttered/spendy $125, was mainly hoping someone knew of a US supplier for a similar socket.I have a chip programmer already, I just need to buy an adapter for the Intel flash chip.Bought an 0411 off eBay last week for $25 shipped.I'll update the thread once I get all the parts needed and the socket installed etc.I sure wish I still worked @ Intel, used to have a bunch of hardware guys, engineers, and even a small group that were working on automotive projects.They were always happy to answer my dumb questions.
    Tony
    Looking to buy TunerCat OBDII
    '88 Jeep Grand Wagoneer (aka Babywag) and '90 Jeep Grand Wagoneer (aka JUNKbucket) both fuel injected
    '94 Caprice Wagon

  5. #5
    Electronic Ignition!
    Join Date
    Sep 2014
    Posts
    12
    Spendy- take a look at what Moates offers for this...

Similar Threads

  1. 0411 ECU and Tach
    By BBPanel in forum GM EFI Systems
    Replies: 1
    Last Post: 09-01-2016, 08:47 AM
  2. '0411 PCM V6 vs. V8 Differences?
    By dave w in forum OBDII Tuning
    Replies: 6
    Last Post: 02-18-2014, 12:29 PM
  3. Bricked an 0411
    By Playtoy_18 in forum TunerCat OBDII
    Replies: 5
    Last Post: 01-09-2014, 08:45 AM
  4. 0411 swap
    By gopher in forum Introductions
    Replies: 2
    Last Post: 12-17-2013, 06:27 PM
  5. 96 LT1 to 0411 PCM with optispark/COP
    By merlot566jka@yahoo.com in forum OBDII Tuning
    Replies: 4
    Last Post: 02-19-2013, 05:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •