help with fuel and $8D XDF

[Turbo Nasty]

Hi everyone. I'm new on the forum and to tunerpro V5. I need help tuning my car. 1990 C4 corvette six speed, 350 chevy, IK180 heads, pro-flo intake manifold, cam, headers and dual exhaust. 32lb/hr fuel injectors. I think stock L98 had 22 or 24lb/hr. I'm using Moates Ostrich2, Burn2 and AEM UEGO wideband O2 with tunerpro V5 I haven't started the car yet since it's rebuild. I'm going to do that tomorrow. I expect it to run very rich. So my main objective is to adjust for these new fuel injectors. for some reason I do not see any fuel or VE table in tunerpro or anywhere to input injector size. I also need to know how to convert Super_8dm2.ecu to a XDF file. That is that same as the $8D mask both found on tunerpros site correct? Moates told me I need that for my car. VATS, what is it and why would I disable it? Finally I need to disable EGR as it has been removed from the car.