So I have the WB installed and 99.9% confident it's reporting accurately.
I tuned the MAF table previously using NB data and stoich of 14.3.
I changed stoich to 14.1 in the .bin after installing the WB, because it just seemed to run a little lean to me.
So analyzing some information now I come up with the below results.
Here is the Display Percentage results.
Engine really responded nicely to the stoich change, overall seems to run better.
Looks like a touch more to the MAF table, and it'll be good.
The gauge is set to display lambda, and hovers around 1.0+/- most of the time under mild driving/idle.
PE seems good until get to ~3000rpm, then it is pretty rich! 11.8-11.2 and this is not a WOT situation.
Any tips on fixing PE? AFAIK this is a completely stock engine.
Bookmarks