Results 1 to 8 of 8

Thread: 1994 Caprice 5.7 LT1 Code 44

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected! babywag's Avatar
    Join Date
    Dec 2011
    Posts
    219

    1994 Caprice 5.7 LT1 Code 44

    Earlier today took the kiddo to Dr., (~5 miles) when I got home I thought I smelled something off.
    Just now went to pick up other kiddo from school, while idling @ curb car started running pretty rough and check engine light came on.
    Drove home ~1 mile, car running like crap, very rough, felt like it was running on 7 cylinders.

    So, get home grab laptop, showing code 44.
    Drop bank 1 cylinders one @ time #7 barely makes any difference in rpm or how it runs.
    Checked injector connectors were secure, ohm tested injector terminals, all reading ~12-13 ohms.
    I can hear them each clicking on/off with a stethoscope.

    Cannot find my fuel pressure gauge @ moment, have to dig around and get a reading.
    I did unplug FP regulator, engine ran different, right bank fuel increased, left bank did not.

    Can even actually smell that it's uber lean.
    BLM=160 INT=193 (idling) on left bank (right bank normal numbers), slowly revving engine brings BLM/INT down touch, but still uber lean.

    Sooo BUMMED, hoping it's something like injector, but I never have good luck so I seriously doubt it.
    Last edited by babywag; 10-26-2016 at 04:30 AM.
    Tony

    '88 Jeep Grand Wagoneer (aka Babywag)
    '67 Jeep J3000
    '07 Dodge Magnum SRT8

Similar Threads

  1. Replies: 4
    Last Post: 03-05-2016, 01:06 AM
  2. Replies: 3
    Last Post: 07-29-2015, 06:48 AM
  3. 86 Caprice Landau TPI Project
    By TPI 86 Caprice Landau in forum GM EFI Systems
    Replies: 6
    Last Post: 01-06-2015, 10:37 AM
  4. 1994 Caprice Baby LT1 V8 4.3 L
    By ddeveloper in forum Introductions
    Replies: 1
    Last Post: 07-28-2012, 04:50 AM
  5. 1994 Caprice LT1
    By EagleMark in forum GM EFI Systems
    Replies: 12
    Last Post: 08-27-2011, 05:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •