I have a 61 VW Baja bug that has a stroker motor that is fuel injected putting out about 215 pony's. It has an old CB Performance fuel injection system that is based on a1990's GM injection system. It was a basket case when I got it and I am working on making it a 1/8 mile sand drag car. I knew nothing about f/I when I got it but am learning. I finally got it running pretty good and am currently installing a air/fuel ratio gage to get the rest of the kinks out. Any help would be appreciated !
Pics, man, pics! Where does one put a V8 in a Bug?
-Phil, in Charleston, SC
'89 S10 Blazer: SOA SAS: Dana 44s, 5.7L V8, 700R4; 35s, 4.10:1; TBI with 1227747 ECM
'94 Grand Cherokee: 4.0, 4" lift, 31s
'90 Jeep Cherokee: In progress: 5.7L V8,700R4,NP231C, D44s. TBI with 1227747 ECM
'87 Fiero GT: 3.8SC (initial research stage)
Lol it's not a v8 yet but someday. I have not done the pic thing yet but I'll will soonOriginally Posted by 89S10_Project
Are you going front-mount or rear? Possibly emulating the Paul Newman beetle?
-Phil, in Charleston, SC
'89 S10 Blazer: SOA SAS: Dana 44s, 5.7L V8, 700R4; 35s, 4.10:1; TBI with 1227747 ECM
'94 Grand Cherokee: 4.0, 4" lift, 31s
'90 Jeep Cherokee: In progress: 5.7L V8,700R4,NP231C, D44s. TBI with 1227747 ECM
'87 Fiero GT: 3.8SC (initial research stage)
Posting Permissions
Reply With Quote
Bookmarks