Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 1 of 1

Thread: Can someone please help with these PID's

  1. #1
    Fuel Injected!
    Join Date
    Jul 2015
    Age
    40
    Posts
    262

    Can someone please help with these PID's

    Ok so I'm not experienced enough to know if these should be changed or not. I have only changed stuff like ve and timing tables plus that cold afr vs coolant temp, it was close to 12.5 at 90 degrees C and I have moved it up a couple times and I do c the change when I do but had to adjust ve table after change to get back to 128.
    Attachment 10960

    Ok I got distracted and thrown off track half way thru this post.

    I wanted to ask about these afr pid's. Why are the afr's so low? Like the cold afr at idle is set to 12.5?!??? And cold afr vs coolant temp was set to 11.0 at high coolant temps. Should I move the cold afr at idle off 12.5 to 14.7? Or is there something else in the computer that needs it to be so low?
    Should I even change these?
    Last edited by BigBanks78; 09-18-2016 at 07:27 AM.

Similar Threads

  1. PID's
    By ericjon262 in forum OBDII Tuning
    Replies: 4
    Last Post: 12-23-2013, 10:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •