Results 1 to 4 of 4

Thread: Need a little 7730, S_AUJP, LC-1 help please.

  1. #1
    Fuel Injected!
    Join Date
    Sep 2012
    Posts
    129

    Need a little 7730, S_AUJP, LC-1 help please.

    So I'm making the transition from MAF 7165 6E to SD 7730 8D. The original plan was 7730 running code 59 with a boosted engine but the boosted part didn't happen..... again.

    I think I have everything working except I can't seem to figure out where to connect the LC-1 to the ECM. I'm sure the information I need is right here and I may have even been looking right at it but these long days of working out in the heat have simply worn me down to the point that by the time I make it to the computer to do research I don't remember what I was researching for.

    Anyway, I'm working with TunerPro, Ostrich, 7730 ECM, S_AUJP v5 2030_D.XDF and S_AUJP v5 2030_D-WBo2 Innovate LC-1.adx.
    I'm not sure what the _D is for on file name so if I need to use a different XDF or ADX file just let me know.

    I have really overloaded my brain lately, I ended up with HPTuners to tune a 2002 Z06, Binary Editor(really with I had left this one to someone else)to tune a 2000 Mustang, working with TunerPro on a 91 454 truck and now learning $8D for my Camaro.........

    Thanks in advance because I know you guys will hook me up on the LC-1.
    Attachment 10951

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,264
    I don't have an answer for the '7030 / LC-1 question.

    I'm thinking the '7030 / LC-1 is similar to the '7427 / LC-1 setup, which basically connects the 0 - 5 volt LC-1 output to the Electronic EGR valve parameter. Maybe you can post the S_AUJP v5 2030_D.XDF and S_AUJP v5 2030_D-WBo2 Innovate LC-1.adx files for us to look at and see if we can figure something out. Maybe there is something that needs to be setup / configured in the .adx / .xdf?

    dave w

  3. #3
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    All the information about S_AUJP you could ever want to know is in the S_AUJP zip files. Setup information both hardware and software, and some other info.
    The man who says something is impossible, is usually interrupted by the man doing it.

  4. #4
    Fuel Injected!
    Join Date
    Sep 2012
    Posts
    129
    Thanks guys, I actually figured this out today. Pin F14 is the answer I was looking for.

Similar Threads

  1. S_AUJP v5 Log File Analyzer
    By 84Elky in forum GM EFI Systems
    Replies: 2
    Last Post: 03-12-2015, 11:29 AM
  2. 1227727/1227730/1227749 v.S_AUJP
    By Six_Shooter in forum GM ECM - Bins - TunerPro Definition Files - Wiring Diagrams - Tuner Info!
    Replies: 3
    Last Post: 03-12-2015, 11:28 AM
  3. S_AUJP v5 Released
    By 84Elky in forum GM EFI Systems
    Replies: 2
    Last Post: 02-15-2015, 04:30 AM
  4. EGR tuning $8D S_AUJP
    By 34blazer in forum GM EFI Systems
    Replies: 15
    Last Post: 04-26-2013, 05:44 AM
  5. MAT temp vs MAT table (S_AUJP)
    By 34blazer in forum GM EFI Systems
    Replies: 18
    Last Post: 02-17-2013, 09:36 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •