Need help with tune info

[itsallornone]

im sure this by now this has been done countless times. lol

ok got a 94 k1500 z71, vortec heads, the vortec roller cam/lifters, edelbrock 2116,tbi plate,bumped up fuel psi, got it all together and it started right up and sounded great, was alittle sluggish under load so i advanced timing a bit and no more spit/sputter, it runs/drives so-so, but now a tune is needed or atleast i would assume

now comes the hard part (atleast i think its the hard part lol) tuning

after some searching the site here looks like i can buy and use these items along with my aldl cable (might be a easier/faster way, if so please explain) trying to keep cost to a minimum. lol

The Moates.net Burn 2
The Moates.net G1
Aries S4
and a few chips

what will i be using software wise and what is it that ill be doing/changing (haha, take it easy on me im new to tuning, but not new to wrenching or computers)

[Tralam]

If you havent yet, you'll find all the info you need to get started here. Download tunerpro and start playing, search any questions you have. This is a good read on what changes can be made:
https://drive.google.com/file/d/0B-3...RiTDJpc2s/view

Also, i have a similar truck. Im not sure you'll need an aries s4.

[dave w]

If you get Wide Band O2 sensor into a data log and export the data log into a .csv file, you can use my tuning spreadsheet to tune with. Here is the link to my WBO2 tuning thread: http://www.gearhead-efi.com/Fuel-Injection/showthread.php?5381-Wide-Band-O2-(WBO2-Tuning)-Spreadsheet

dave w

[itsallornone]

Ended up throwing a holley 750 vs on with hei dist and fuel regulator W/return. had to build a bracket for my TPS sensor to mount to side of carb, truck runs great now and looks amazing under the hood

[dave w]

Thanks for the update. dave w

[Loyd]

what is your tranny? are you still using the factory chip in the ecu? have the same truck and a 350 and been tuning it but we have fuel delivery problem with 2 rear cylinders running rich. think it a problem with the adapter plate and intake manifold.