Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Page 4 of 4 FirstFirst 1234
Results 46 to 46 of 46

Thread: SBC TPI 0411 24X conversioin

  1. #46
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Euless, TX
    Posts
    1,578
    Quote Originally Posted by evilstuie View Post
    Hey Fast355,
    I just downloaded the VCM editor for HP Tuners and found it as you said on the diag tab. Wow, this could be an issue if both have been done then essentially it's just cancelled the change out.
    But the TunerPro XDF I was using didn't have an option for firing order, so I assume the firing order is still set to LS1 and repinning has corrected the firing order.
    Actually they BOTH need to be done. The firing order needs to be re-pinned to the correct order and the firing order in the diagnostics tab should be changed. The firing order will not put the injectors and coils into the correct order, but it will correct the firing order in the tune so that the PCM will flag the correct cylinder when you have an injector/coil/misfire related code. If you do not correct the diagnostic side, the PCM will flag the wrong cylinder and you will go crazy trying to diagnose say a p0307 misfire, on cylinder 7 it would actually be cylinder 4 with the problem.
    Last edited by Fast355; 01-23-2018 at 02:02 PM.

Similar Threads

  1. '0411 PCM V6 vs. V8 Differences?
    By dave w in forum OBDII Tuning
    Replies: 6
    Last Post: 02-18-2014, 12:29 PM
  2. 0411 5.3 cam tuning.
    By Playtoy_18 in forum OBDII Tuning
    Replies: 44
    Last Post: 01-25-2014, 12:42 PM
  3. Bricked an 0411
    By Playtoy_18 in forum TunerCat OBDII
    Replies: 5
    Last Post: 01-09-2014, 08:45 AM
  4. 0411 swap
    By gopher in forum Introductions
    Replies: 2
    Last Post: 12-17-2013, 06:27 PM
  5. 96 LT1 to 0411 PCM with optispark/COP
    By merlot566jka@yahoo.com in forum OBDII Tuning
    Replies: 4
    Last Post: 02-19-2013, 05:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •