Results 1 to 4 of 4

Thread: Need help with autoprom and TunerPro SOS

  1. #1
    Fuel Injected!
    Join Date
    Apr 2016
    Posts
    27

    Need help with autoprom and TunerPro SOS

    I need help getting my Autoprom to work for datalogging. It works fine in terms of reading, writing and erasing chips but we can not get the stupid thing to communicate with the vehicle.

    We have it set up correctly in the preferences tab on Tuner pro and we're attempting to use pass thru mode. The only thing that displays when it shows "connected" is every single gauge and reading pegged to the absolute maximum. We are running the latest and correct $42 mask.

    Moates replaced the autoprom after they got into our computer remotely and could not solve the problem. We've tried the Autoprom on multiple computers and multiple vehicles but we get the same results every time. All readings pegged to Max and no problem directly talking to the chips. We have tried Winaldl with no luck. Have also reset the drivers countless times.

    Can somebody please help before I smash the AutoProm into oblivion?!

  2. #2
    Fuel Injected!
    Join Date
    Apr 2016
    Posts
    27
    Also wanted to include were using a 7747 ecm and we can get info from the aldl port using a high end shop tuner. We've tried to talk to multiple vehicles with no luck.

  3. #3
    Fuel Injected!
    Join Date
    Aug 2012
    Posts
    386
    I know you said things were set right but are you double sure the xdf and adx match your version of tuner pro and that the pass thru switch is opposite of when you were burning. Only putting my two bits in cause no responses.
    6395, BHDF, 7.4 BBC lightly modded now 6395 BMHM back to BHDF

  4. #4
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    washington indiana
    Age
    69
    Posts
    884
    my have to change tp settings for data logging in the prefemnces to plug in.

Similar Threads

  1. AutoProm ADC Interface Channels Set up in TunerPro!
    By EagleMark in forum TunerPro Tuning Talk
    Replies: 43
    Last Post: 05-21-2018, 04:45 AM
  2. Need help with TunerPro and Autoprom 7747 ECM
    By cs641 in forum TunerPro Tuning Talk
    Replies: 2
    Last Post: 06-03-2016, 04:58 PM
  3. Help with AutoProm
    By VCaddy in forum GM EFI Systems
    Replies: 5
    Last Post: 07-20-2015, 10:57 PM
  4. Moates Autoprom TunerPro RT Failing to Emulate
    By UglyBoost91 in forum GM EFI Systems
    Replies: 6
    Last Post: 03-30-2014, 10:25 PM
  5. Reading Stock GM Chips Burn 1, Burn 2, AutoProm TunerPro Flash and Burn
    By EagleMark in forum Fuel Injection Writeups Articles and How to New and Old
    Replies: 0
    Last Post: 01-27-2013, 08:15 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •