hello, i've been reading everything i can find on this and a couple of other boards.i have done 1 engine swap a 4.3l 1992 tbi into a 1984 s-10 2.8l,but that was just connecting the right wires to each other.
My next project is a TBI conv on a 1983 C20 with a stock 350. I have 2 setups to use 1 is a stand alone harness from turbo city,and the other is a stock setup from a 1988 K30 5.7l.
I look forward to learning all i can from anyone who is willing to help.thanks, JIM
the first pic is the S-10 4.3l,sm465,203/205 doubler.dana 60/14 axles on 42 in rubber.
the second pic is my 83 C20 already converted to 4 wheel drive using factory parts.
Bookmarks