Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 7 of 7

Thread: BURN 2 Reading proplem

  1. #1
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    57
    Posts
    91

    BURN 2 Reading proplem

    I just started using burn 2 and am having problems reading 27SF512 chip, it is only showing 1 byte when I save it
    and eveything shows up blank when I try and open it in TP. do i need to enter other values and what will I need to
    set burn 2 to to read a stock factory memcal out of a 1990 corvette code ANHU.

  2. #2
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    57
    Posts
    91
    OK i figured out how to read and copy the bin from my stock memcal using TP, ANHU for a 1990 corvette auto 2.59 gears
    Here is a link https://drive.google.com/file/d/0B5d...ew?usp=sharing

  3. #3
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    57
    Posts
    91
    However I am not able to read a memcal that has a 27SF512 chip in it. any tips appreciated.

  4. #4
    Fuel Injected! uncabob's Avatar
    Join Date
    Jan 2016
    Age
    81
    Posts
    120
    Quote Originally Posted by eutu1960 View Post
    I just started using burn 2 and am having problems reading 27SF512 chip, it is only showing 1 byte when I save it
    and eveything shows up blank when I try and open it in TP. do i need to enter other values and what will I need to
    set burn 2 to to read a stock factory memcal out of a 1990 corvette code ANHU.
    Did you set the start and end channels to 00f000 and 00ffff respectively? The 27sf512 loads on the end as I understand it. Oh and don't make my first
    mistake and type OHs for zeros. (0 vs O)
    Don't force it, get a bigger hammer!

  5. #5
    Fuel Injected! uncabob's Avatar
    Join Date
    Jan 2016
    Age
    81
    Posts
    120
    Don't force it, get a bigger hammer!

  6. #6
    Fuel Injected!
    Join Date
    Jun 2015
    Location
    Ashland, PA
    Age
    57
    Posts
    91
    OK using the 32k values worked. Thank You

  7. #7
    Fuel Injected! MQQN28's Avatar
    Join Date
    May 2016
    Location
    Melbourne Australia
    Age
    71
    Posts
    48
    This table will help also

    Attachment 10901

    MOC

Similar Threads

  1. OSTRICH OR BURN
    By eutu1960 in forum GM EFI Systems
    Replies: 3
    Last Post: 05-08-2016, 02:32 AM
  2. Flash & burn
    By Byron in forum GM EFI Systems
    Replies: 2
    Last Post: 02-02-2016, 10:43 PM
  3. what do i need to burn chip?
    By istter1 in forum TunerPro Tuning Talk
    Replies: 0
    Last Post: 10-16-2013, 09:44 PM
  4. Reading Stock GM Chips Burn 1, Burn 2, AutoProm TunerPro Flash and Burn
    By EagleMark in forum Fuel Injection Writeups Articles and How to New and Old
    Replies: 0
    Last Post: 01-26-2013, 10:15 PM
  5. first chip burn
    By 85Z28NOS in forum GM EFI Systems
    Replies: 4
    Last Post: 07-18-2012, 08:25 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •