First Time Tuning.

[eutu1960]

I should be getting my ostrich 2.0 this afternoon, I was not able to find the stock bin (broadcast code ANHU) FOR MY 90 CORVETTE WITH 7727 ECU. I found a bin for a 91 vette with the same gearing and downloaded it. I am using xdf file $8D-1227730-V1 https://drive.google.com/file/d/0B5d...ew?usp=sharing and so far I made changes to the bin idle rpm, egr delete, fuel cut off, cylinder volume, injector size, fan on & off, cylinder volume. https://drive.google.com/file/d/0B5d...ew?usp=sharing is there any thing else I should do before i upload the bin to the ostrich. thank you.

specs are 383 TPI
comp cams 08-302-8 http://www.compcams.com/Company/CC/c...?csid=212&sb=2
stock heads & intake
headers
auto with 2.59 rear gears.

[eutu1960]

just received the ostrich and plugged it into my android tablet to use with ALDLDroid
and noticed that the menu is different from tuner pro, I did upload the bin to the ostrich using tuner pro
on my home pc. I will have to wait to try it out on my car for now until I have time.

[eutu1960]

just received the ostrich and plugged it into my android tablet to use with ALDLDroid
and noticed that the menu is different from tuner pro, I did upload the bin to the ostrich using tuner pro
on my home pc. I will have to wait to try it out on my car for now until I have time.

OK never mind I just realized that there is a drop down menu on the when on the tuning page that has the correct bin and xdf files i need to select.

[eutu1960]

Had a few minutes to play with the ostrich this morning and did a short data log, runs rich with present settings and very rough.
here is a data log https://drive.google.com/file/d/0B5d...ew?usp=sharing
I will have to play with it some more when I have time.