You will need a TBI V6 Memcal from a 16197427 ECM. Inside the Memcal is the "Cylinder Select" setting that tells the computer the engine is a V6 or V8.
I recommend installing a Vehicle Speed Sensor (VSS) when using the 16197427 ECM.
dave w
You will need a TBI V6 Memcal from a 16197427 ECM. Inside the Memcal is the "Cylinder Select" setting that tells the computer the engine is a V6 or V8.
I recommend installing a Vehicle Speed Sensor (VSS) when using the 16197427 ECM.
dave w
Dave, Thanks for your answer , my configuration is very special , I have a Chevy Nova 2 door 1977 with 3 speed saginaw, floor console, for the vss I try to create a gps module who send the correct pulses to ECM.
In other case I can put a 4l60E tranny....I really love automatic transmission.
About the memcal, It is possible to burn a memcal with v6 tbi configuration, and put in the ECM? or I need to buy from any site this memcal?
For the ECM controled advance I pretend to put in the original HEI distributor a standard lx315 module ( 7 pin) and remove the mechanical advance, this confiuration its very important to me because I have some issue with the mechanical advance today.
Thanks!
Waldo.
Last edited by wnagel; 08-06-2016 at 03:38 AM.
The 4.3 Memcal PROM Chip can be reprogrammed for either automatic or manual transmission. I found this 4.3 TBI Memcal on ebay: http://www.ebay.com/itm/CHIP-BDYT-4-...pXoKsn&vxp=mtr
The LX315 will work with 16197427, with the correct wiring.
dave w
Well,
Today I buy a harness, throttle body and ECM for my project, Its come from a 94/95 c1500 truck, 16197427 JBHL from a V8 5.7 and 4l60e tranny.
I know I need a new rom or maybe reflash the existing rom, I need to study and read more to know how I can transfor my ECM from V8 to V6.
I presusme I need a lot of time to finish this idea, tomorow I can upload a picture from my KIT.
Last edited by wnagel; 08-12-2016 at 06:22 AM.
This is my harness kit i need to clean and study.
Attachment 10881Attachment 10882
Bookmarks