Values in ohms are:
1-2 shift 21.2
2-3 shift 21.9
Press. Control 4.6
3-2 control 11.4
TCC 23.8
TCC control 11.2
Here's the bench- notice the PCM removed so I can apply voltage down the wire to pin E and ground through the PCM connector pins for each solenoid (except the pressure control solenoid). PCS can be tested with a 9V battery briefly. Testing from PCM down to solenoids gives me more confidence things are working. Honestly, I'm hoping to find something wrong with the harness and just replace it and be done.
Bookmarks