People say that memcal's have a cylinder count so v8 memcal goes with a v8 ect. But what else is there and what does that stuff do?
People say that memcal's have a cylinder count so v8 memcal goes with a v8 ect. But what else is there and what does that stuff do?
I can think for four basic functions to the Memcal. Cylinder Select, PROM Chip, Knock Filter, and Limp Home Mode.
dave w
What does the knock filter do? I have several quad 4 memcal's and a couple have different numbers/letters on them so wondering if I could use the wrong one or wrong year?
Can you post the Broadcast Code (BCC) from the Memcals? Usually the BCC's have four letter codes, like for a TBI BCC - AMUR.
dave w
1 is AMNP from 1990 grand am, ANLP, ANZF, are what I can remember. Will the memcal be different from standard to auto transmission? I have a problem with knock retard staying on once it trips knock counter until key is cycled off then back on. I have a standard trans and if I miss a gear it sets off knock counter.
1990 2.3l quad-4 8707 $8B
when I say "they have different numbers/letters" I mean on the circuit board next to chip
Last edited by BigBanks78; 07-16-2016 at 02:56 AM.
AMNP - 1988 4.5 V8 TBI
ANLP - 1990 Quad 4 Auto ECM 1228708
ANZF - 1989 Quad 4 Auto ECM 1228708
I think you will need:
ANZJ
ANZK
ARAL
ARAM
BAWA
BAWC
dave w
Sorry that was an ANMP. So what is different between them?
i have at least 1 from a 1991 grand am as well. Those don't sound familiar but I have a stack so gonna check
Last edited by BigBanks78; 07-17-2016 at 02:23 AM.
Using an AYDX
ANMP - 1990 Quad 4 Auto ECM 1228708
AYDX - 1991 Quad 4 Auto ECM 1228708
The list below are 1989 Quad 4 with Manual Transmissions
ANZJ
ANZK
ARAL
ARAM
BAWA
dave w
BAWC
Ok Thanks :-) why a 1989, just curious?
Dang close......I have a ARHL should b 89 auto trans :-) I was excited for a slip second
Posting Permissions
Reply With Quote
Bookmarks