Results 1 to 2 of 2

Thread: No CEL, No Start with Newly Burned EEPROM

  1. #1
    Carb and Points!
    Join Date
    Apr 2013
    Posts
    9

    No CEL, No Start with Newly Burned EEPROM

    1992 Chevrolet Lumina
    3.1L V6 Vin T
    ECM: 1227727
    Broadcast Code: AXKK
    TunerPro V4.x
    Moates USB AutoProm, GP1 Adapter
    Mask ID: $A1


    New guy here....I have a problem and I’m looking for suggestions on how to resolve it. Here's what I've done so far.


    I’ve read and saved he stock BIN off the EPROM out of the ECM.


    Before I start editing any program settings, I uploaded the stock BIN to the buffer and written it to an erased 27SF512 chip just to confirm I have the process down.


    I’m using the correct buffer and chip offsets/addresses for a 56K (57344 byte) file.


    I’ve re-installed the newly burned chip into the ECM using a Moates GP1 adapter.


    The problem is there’s no CEL with the key on/engine off and the engine won’t start. I’m sure the two are related.


    The new chip has been positioned and oriented correctly in both the AutoProm and adapter sockets; the stock EPROM is also correctly attached to the GP1 adapter.


    The engine and CEL behave normally when I re-install the stock EPROM.

    Could this be a problem with the Mask ID? I did get the $A1 off of one of the programming forums online (can't recall which one). I don't know if the file might have been altered.


    Any suggestions as to what I may be missing?

    TIA

  2. #2
    Carb and Points!
    Join Date
    Apr 2013
    Posts
    9
    Closing this thread....

    There was an issue with the stock BIN size. Why it initially read as a 56K file is unknown (operator error, no doubt); the file is supposed to be a 32k file.

    Re-read the stock BIN, re-burned to the correct 32k addresses and all is good.

Similar Threads

  1. Now that's a burned valve!
    By jim_in_dorris in forum Gear Heads
    Replies: 5
    Last Post: 08-16-2018, 04:13 AM
  2. 7730 ecu eeprom compatibility
    By garnerm in forum GM EFI Systems
    Replies: 4
    Last Post: 05-30-2015, 06:07 PM
  3. Replies: 6
    Last Post: 10-11-2013, 12:36 AM
  4. Offsets in EEPROM
    By brianko in forum GM EFI Systems
    Replies: 2
    Last Post: 11-12-2012, 07:15 AM
  5. ECM1 burned... causes?
    By Xenon in forum GM EFI Systems
    Replies: 4
    Last Post: 04-18-2012, 07:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •