Results 1 to 7 of 7

Thread: Socketed GM LT1 16188051 ECM w/ Programmer

  1. #1
    Fuel Injected! EDZIP's Avatar
    Join Date
    May 2012
    Location
    Champlain, NY
    Age
    73
    Posts
    330

    Socketed GM LT1 16188051 ECM w/ Programmer

    Not Mine..spotted it on eBay (it's in Canada)


    http://www.ebay.com/itm/Socketed-GM-...xXcFI2&vxp=mtr

  2. #2

  3. #3
    Fuel Injected! EDZIP's Avatar
    Join Date
    May 2012
    Location
    Champlain, NY
    Age
    73
    Posts
    330
    Well we know it's from a good source!

  4. #4
    Electronic Ignition!
    Join Date
    May 2016
    Age
    41
    Posts
    10
    Wow cool I was the one who got this off eBay.

  5. #5
    Fuel Injected! EDZIP's Avatar
    Join Date
    May 2012
    Location
    Champlain, NY
    Age
    73
    Posts
    330
    Quote Originally Posted by jeremyg View Post
    Wow cool I was the one who got this off eBay.
    From a good source and very handy to have...if you have a bad flash...just pop the proms, flash and install. Great for testing your flash equipment.

  6. #6
    Electronic Ignition!
    Join Date
    May 2016
    Age
    41
    Posts
    10
    Ok. Now that there's 2 chups and 1 bin file what's the best way for splitting the bin file to put onto the 2 chips. I got the mini pro software and it's working fine reading the chips.

  7. #7
    Fuel Injected! EDZIP's Avatar
    Join Date
    May 2012
    Location
    Champlain, NY
    Age
    73
    Posts
    330
    Quote Originally Posted by jeremyg View Post
    Ok. Now that there's 2 chups and 1 bin file what's the best way for splitting the bin file to put onto the 2 chips. I got the mini pro software and it's working fine reading the chips.
    This thread has it all:

    http://www.gearhead-efi.com/Fuel-Inj...able-image-for

    The images by forum member 96lt4c4 worked for me. Once you load them..the PCM will communicate again then you can reflash the pcm with your full bin.
    Last edited by EDZIP; 07-16-2016 at 06:33 PM.

Similar Threads

  1. Galep-4 programmer
    By mOskit in forum GM EFI Systems
    Replies: 5
    Last Post: 11-28-2015, 11:51 AM
  2. New Programmer
    By bounder in forum Introductions
    Replies: 1
    Last Post: 08-22-2014, 12:36 AM
  3. 16188051
    By buddrow in forum GM EFI Systems
    Replies: 0
    Last Post: 03-15-2014, 07:54 AM
  4. Replies: 16
    Last Post: 02-09-2013, 11:59 PM
  5. new programmer/turbo city bin
    By kunsan1987 in forum GM EFI Systems
    Replies: 2
    Last Post: 06-03-2012, 06:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •