Not Mine..spotted it on eBay (it's in Canada)
http://www.ebay.com/itm/Socketed-GM-...xXcFI2&vxp=mtr
Not Mine..spotted it on eBay (it's in Canada)
http://www.ebay.com/itm/Socketed-GM-...xXcFI2&vxp=mtr
Well we know it's from a good source!
Wow cool I was the one who got this off eBay.
Ok. Now that there's 2 chups and 1 bin file what's the best way for splitting the bin file to put onto the 2 chips. I got the mini pro software and it's working fine reading the chips.
This thread has it all:
http://www.gearhead-efi.com/Fuel-Inj...able-image-for
The images by forum member 96lt4c4 worked for me. Once you load them..the PCM will communicate again then you can reflash the pcm with your full bin.
Last edited by EDZIP; 07-16-2016 at 06:33 PM.
Bookmarks