Hi Guys,
Just trying to fire up my build and it doesn't want to play.
Checked for all vacuum leaks and plugged them, but it coughs and splutters but no roar.

My build is basically:
0411PCM x24 tooth reluctor and coil packs.
400SBC
HSR with 28lb injectors
XE270HR cam
AFR 195s (ported to approx 215)
10.1 comp
4L60E
Current OS is 12225074 but I can use any OS if you can send the full BIN yes?

I'm using MAF /MAP Holden VX Commodore LS1 bin and flashing using dimented's ls1 flash program with an avt-852 cable and tuner pro edit the files. I've removed VATS, got spark and fuel, just not in the right combo.
No DTCs registering, so I'm assuming? I dropped the vortec dizzy in properly? and the timing is right, but anything could be wrong at this point.

Fuel pressure is set to about 52psi, but tried lower and higher with no luck.

Any help would be greatly appreciated