Results 1 to 4 of 4

Thread: Missing Error codes in an ADX ???

  1. #1
    Fuel Injected! darbysan's Avatar
    Join Date
    Aug 2013
    Location
    Las Vegas
    Age
    73
    Posts
    26

    Missing Error codes in an ADX ???

    I'm getting an error code every time I drive, but nothing shows up in TunerPro RT, either while I am driving and the code lights up, or after stopping. The MIL Light goes away when I turn off the engine, and does not appear until the next drive. The light comes on about 5 minutes into the drive. I'm hoping that it might be an error code that was not defined in the ADX ????

    A couple of error codes are missing for my not-so-popular ECM 16183247. It is from a '95 3800 series I Supercharged 3800. i am using XDF $5B 94-95 L27 L67 3.8.XDF; ADX 5B7.adx. I think the error codes are defined in the ADX ( sure not an expert here).


    In comparing the Factory Service Manual codes to the Error Flags in TunerPro RT, I found only two that were undefined in TunerPro- P1257 Boost Control Problem; and P1623 PROM Error. P200 Injector Circuit Fault and P1860 Torque Converter Clutch PWM Solenoid Circuit are also missing, but are identified as VIN K ( non Supercharged), vs the Supercharged (Vin 1) version I am working with.


    Wonder if there is any way to get these defined. I suppose with a little information I could maybe figure out how to modify the ADX to add these, but I'm not sure I'm that smart I can certainly copy the format of the other codes, but have no clue as to how to find the "location" of the error flags to start with. My experience with Assembly language was over 40 yrs ago, and I've forgotten pretty much all of what I learned!!!
    '85 SS El Camino, Gm Crate 350 L31, Vortec heads,TPI.
    https://sites.google.com/site/darbyselky/home

  2. #2
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    i'm going off of memory at the moment, but 5B7 doesn't apply directly to 94-95 L67 engines IIRC. I believe you're looking for just 5B?
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  3. #3
    Fuel Injected! darbysan's Avatar
    Join Date
    Aug 2013
    Location
    Las Vegas
    Age
    73
    Posts
    26
    I'm pretty sure you are correct. I found the 5B_V5 ADX and tried that as well- same error codes programmed in both of them ( probably one started as a copy??). I finally gave up and had Ryan at GMtuners create a BIN for me. It eliminated the random MIL light, misfires and stalls, so I'm happy about that. Just wish I could have figured it out myself ( the engineer in me!).
    '85 SS El Camino, Gm Crate 350 L31, Vortec heads,TPI.
    https://sites.google.com/site/darbyselky/home

  4. #4
    I have not found a sure answer from the developers, will the program work with my 1995 Buick Riviera SC L67 , ECM 16183247? I have an ALDL16-pin/USB adapter...
    I'm using:
    XDF:
    $5B 94-95 L27 L67 3.8.xdf
    ADX:
    $5B-16183247-16197428-V2.2.adx
    (bin: the download is not offered)
    After the connection is established, all data changes chaotically all the time
    Last edited by Maga-laketz 95Riviera; 10-10-2023 at 11:14 AM.

Similar Threads

  1. Where Do I Find the Error Codes?
    By jacfalcon in forum GM EFI Systems
    Replies: 4
    Last Post: 04-28-2015, 07:53 PM
  2. TunerPro Mode 10 – Clear Malfunction Error Codes
    By EagleMark in forum TunerPro Tuning Talk
    Replies: 15
    Last Post: 02-24-2012, 09:44 PM
  3. GM ECM Reading Error Codes CEL-SES Light
    By EagleMark in forum Fuel Injection Writeups Articles and How to New and Old
    Replies: 0
    Last Post: 03-20-2011, 09:20 PM
  4. FAQ on EFI Conversion Links, Troubleshooting, Error Codes!
    By Six_Shooter in forum GM EFI Systems
    Replies: 0
    Last Post: 03-03-2011, 07:41 AM
  5. Checking for error codes and troubleshooting!
    By EagleMark in forum GM EFI Systems
    Replies: 0
    Last Post: 02-22-2011, 01:37 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •