Results 1 to 8 of 8

Thread: SLC-dyi2 wideband kit How to make wire connections??

  1. #1
    Fuel Injected! fasteddi's Avatar
    Join Date
    Dec 2011
    Location
    Ohio
    Age
    39
    Posts
    466

    SLC-dyi2 wideband kit How to make wire connections??

    Which wires go where??? I did dont get instructions on the wiring and have absolutly no idea what connections to make as the kit cam assembled except the wires to the controler. This is for a 1227730 ECu in a 1991 camaro. If anyone can help or show me where i can find a manual for a SCL diy2 kit that would be awsome since all i can find is a manual on the diy1 kit, which is older and different!
    Thanks!!
    Turbo 3.1/3100 V6 Thirdgen Camaro
    Best 1/4 mile 11.59@119Mph 15psi

  2. #2
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    i think a phone call or email to them is in order...

    Or isn't the DIY1 kit same thing but unassembled? So instructions would be accurate...

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  3. #3
    Fuel Injected! fasteddi's Avatar
    Join Date
    Dec 2011
    Location
    Ohio
    Age
    39
    Posts
    466
    Quote Originally Posted by EagleMark View Post
    i think a phone call or email to them is in order...

    Or isn't the DIY1 kit same thing but unassembled? So instructions would be accurate...
    yea the DIY 1 isnt the same, its not assembled. This one is assembled except the wires from the connectors are not. I will email them and hope i get a prompt message. This is really the last difficult thing to accomplish before I can start the car. Also the DIY has a 10 pin bar on the connector.. this one has a 4 bar, then a 3 bar then a 2 bar connector. So 3 seperate ones compared to the single connector the DIY 1 has.
    Turbo 3.1/3100 V6 Thirdgen Camaro
    Best 1/4 mile 11.59@119Mph 15psi

  4. #4
    Fuel Injected! fasteddi's Avatar
    Join Date
    Dec 2011
    Location
    Ohio
    Age
    39
    Posts
    466
    Ok I made a call and got a link to download the instructions, i assembled the cable that hooks from the WB sensor to the controler, took me 30 min. and alot of cussing, but i got that done, now I just need to make the power cable and ill be good to go. There are 2 aux. outputs on this thing but im not planning on reading anything but the AFR. Theres a 5vts output to what ever i choose. Can I hook this to my 1227730 ECU?? I know the $59 mask has a WB code in it.....
    Turbo 3.1/3100 V6 Thirdgen Camaro
    Best 1/4 mile 11.59@119Mph 15psi

  5. #5
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    There's usually a 0 to 5 volt wire for Wide Band AFR reading. I tie it into my AutoProm, some guys have an extra wire into ECM. I don't know what to do with your ECM? It has USB to hook to laptop and software to read AFR right? I like it in same log as data log but can be done by itself.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  6. #6
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    Set up the WBO2 input as per instructions on code59.org. Pin F14 IIRC.
    The man who says something is impossible, is usually interrupted by the man doing it.

  7. #7
    Fuel Injected! fasteddi's Avatar
    Join Date
    Dec 2011
    Location
    Ohio
    Age
    39
    Posts
    466
    Yea it does have the usb cable to tie into the software i have. But I figured while i do the pin out for the TCC this weekend I could tie a input into the ECU.

    Thanks sixshotter ill be sure to read up on code59 some more.

    There is alot of functions and outputs/inputs that this kit can handle. I love it!
    Turbo 3.1/3100 V6 Thirdgen Camaro
    Best 1/4 mile 11.59@119Mph 15psi

  8. #8
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    One of your extras should be an Exhaust Gas Temp sensor...

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •