Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 2 of 2

Thread: tunerpro and aldl cable problems

  1. #1
    Fuel Injected!
    Join Date
    Oct 2011
    Posts
    49

    tunerpro and aldl cable problems

    I think my old aldl cable is dying, but im not sure.

    I have no idea who's it is. its a serial port unit, that plugs into another cable, that plugs into an adapter, that plugs into a usb converter. its messy to say the least.

    on my stock tbi truck with winaldl, it connects just fine every time.

    on my 7727 swap project with tunerpro, it only connects if I first plug in the chip burner, then unplug the burner, and install the cable with the 10k resistor. even then, it sometimes takes multiple tries, and has a bunch of communication errors according to tunerpro.

    so, is it a bad cable? something else I'm missing? I've tried every driver, etc I can find.

    just want to make sure that im not pissing money away. its frustrating enough that im almost ready to rip all the GM stuff out and buy a megasquirt.

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    3,619
    I can't honestly say your cable is good or bad. What I can say from my own personal experience is my old serial ALDL cable worked great with my old laptop, which had an actual 9 pin serial connector. After upgrading to a new laptop, that did not have a 9 pin serial connector, I ended up buying a USB ALDL cable from: http://aldlcable.com/products/aldlobd1u.asp I tried a couple different serial to USB adapters with my old serial ALDL cable and new laptop with limited success.

    When my USB ALDL cable arrived, I plugged the new ALDL cable into my new laptop, and then I ran the driver install directly from Moates.net http://www.moates.net/usb-driver-p-215.html?cPath=78

    My new laptop is Win 7.

    Maybe a new USB cable is less expensive and less work than megasquirt?

    dave w

Similar Threads

  1. Replies: 6
    Last Post: 01-21-2016, 04:33 PM
  2. ALDL cable question...
    By jrhoades001 in forum TunerPro Tuning Talk
    Replies: 4
    Last Post: 07-30-2015, 12:58 PM
  3. aldl problems and over fueling
    By higgy in forum GM EFI Systems
    Replies: 15
    Last Post: 06-14-2015, 07:48 PM
  4. USB/ALDL cable
    By Cricket_crawler in forum TunerPro Tuning Talk
    Replies: 1
    Last Post: 04-15-2013, 10:45 AM
  5. getting started with tunerpro and aldl cable for dummies.
    By one92rs in forum TunerPro Tuning Talk
    Replies: 8
    Last Post: 11-24-2012, 04:27 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •