I have a 1987 Chevy R10 with 5.7L TBI. After a long winter of working on the suspension the engine is acting up. It will idle fine but in park at about 1400 RPM it starts to sputter and wants to die. I have attached an XDL file and excel file for your review. One item to note is the O2 sensor is unplugged, I cut the wire in an attempt to remove it from the manifold but have not been able to get it out yet.
I just rebuilt the throttle body, sent the injectors out to be cleaned, new iac motor (went through the procedure to set min idle), MAP sensor is new, EGR causes engine to bog when I push on the diaphragm with my fingers, timing is set at 0 degrees with timing advance wire unplugged. I will be replacing the temp sensor this afternoon.
Can you see anything in the attached file that would point to what the issue is, I dont have enough experience with this type of data to know whats normal and what isnt.
Thanks,
John
Bookmarks