There is an adx for VPW cars but thats one generation earlier. There is absolutely no reason it couldnt be adapted to can bus cars and would work but someone needs to do it. There is a version of the AVT cable (the tunercat cable) which has analog input and this can be used for wideband as the adx can read those inputs. If you have the electronics skills you can fit the wideband (analog input) to the TC cable, its only a couple of components and a header.
Attached is pics of the stock cable, and with the analog input components added. Also the labeling for the ADC channels on the case.
The VPW adx with wideband was written Jayme from pcmhacking and is here: http://pcmhacking.net./forums/viewtopic.php?f=10&t=2314
Can bus is a bit tricky as the data in the headers is not all 8 bits so you need to look at it on the bit level, but it can be done.
The components are:
D2, D5, D8 are MMBZ27VCLT1G TVS Diode Arrays 27V 225mW Dual Common Cathode
D3,D4,D6,D7,D9,D10 are Fairchild SS14 Schottky Diodes & Rectifiers SMA 40V 1.0A
Bookmarks