help with datalogging

**droptopstng** · 02-08-2012

I have {my bosses truck}a 1994 chevy c1500 5.7 4l60e 3.42 gear.We freshened the motor up last year put a small comp cam,tbi spacer,injector pod spacer,air horn under air cleaner,shorty headers ,aftermarket y pipe,flowmasters and no cats,flat top pistons and a little head work.We installed a bigger fuel pump and fpr spring however we removed the spring.I have since found his bin file thanks to this website along with what i can best guess is the correct xdf and adx, i am confused as this has a 16196395 ecm but has a bjlf bin so do i use an oe or od adx.with that in mind I have tried the A218 Trans1 $0D TP5 v250 file for the adx and seems to work good other than a little twitchy but I cannot find how to view int and blm

**gregs78cam** · 02-08-2012

If the .bin, .xdf, and .adx are all $0D then you should be set. the '6395 is the predecessor of the '7427 and from what I have read functions exactly the same. I don't know whether the INT and BLM are in the Trans datastream. Try the Engine Datastream A217.

**droptopstng** · 02-08-2012

lol ok well that would explain it im an idiot sorry

**droptopstng** · 02-08-2012

thanks Gregg thats solved now to figure out how to calculate ve tables on this truck

**93V8S10** · 02-08-2012

You can confirm that your bin is $0D by looking at the "Mask ID", in the xdf.

**droptopstng** · 02-08-2012

Originally Posted by 93V8S10

You can confirm that your bin is $0D by looking at the "Mask ID", in the xdf.

done and works great now thanks peoples

**bonnieclyde100** · 01-29-2014

i have the same PCM and the same BJLF bin you had and was wondering what bin and adx file you ended up using and how your tuning went on that truck.

Originally Posted by droptopstng

I have {my bosses truck}a 1994 chevy c1500 5.7 4l60e 3.42 gear.We freshened the motor up last year put a small comp cam,tbi spacer,injector pod spacer,air horn under air cleaner,shorty headers ,aftermarket y pipe,flowmasters and no cats,flat top pistons and a little head work.We installed a bigger fuel pump and fpr spring however we removed the spring.I have since found his bin file thanks to this website along with what i can best guess is the correct xdf and adx, i am confused as this has a 16196395 ecm but has a bjlf bin so do i use an oe or od adx.with that in mind I have tried the A218 Trans1 $0D TP5 v250 file for the adx and seems to work good other than a little twitchy but I cannot find how to view int and blm

**droptopstng** · 01-29-2014

Originally Posted by bonnieclyde100

i have the same PCM and the same BJLF bin you had and was wondering what bin and adx file you ended up using and how your tuning went on that truck.

I have just tried to upload but would let me.... look up a fellow on here goes by jeepsandguns I believe but he gave me all the right pieces to complete this puzzle truck now runs great and everything I used was for the 427 pcm

**droptopstng** · 01-29-2014

let ma also add that everything the guys on this site have helped with worked out great sorry I don't get on here more but im now working 100 plus a week and don't get to do much on the side but these are fantastic people and they know whats up thanks to all who helped me