Switching tbi injectors

[myburb]

I am currently running 94 high pressure injector at 32 psi. My ve is up 100 and should actually be a little bit more so looking at dropping in some 55 lb sbc injectors and running them at the same pressure. It looks to me like they would flow 15% more than I have now so the plan would be to lower my ve 15% across the board. Is that thinking right and will the 55 lb sbc injectors fit in the bbc high pressure tbi without mods

[Fast355]

I am currently running 94 high pressure injector at 32 psi. My ve is up 100 and should actually be a little bit more so looking at dropping in some 55 lb sbc injectors and running them at the same pressure. It looks to me like they would flow 15% more than I have now so the plan would be to lower my ve 15% across the board. Is that thinking right and will the 55 lb sbc injectors fit in the bbc high pressure tbi without mods

The 55 lb/hr 305 injectors are hard to come by. I would use the 61# 350 injectors. I also had a marine throttle body off a 502 that had 61# high pressure injectors.

[myburb]

I have a bunch of 55 and 61's in the shop so wanted to test with what I had. The big question without taking things apart is will the 55's or 61's fit in the late 454 tbi without any mods.

[1project2many]

The large body TBI injectors all have the same dimensions. However, sometimes the low pressure injectors do not work well with higher pressure.

[myburb]

Thanks, I also have a set of 65's that I could use at a lower pressure. The main thing is they fit without me pulling to measure.

[brian617]

I'm running 305 injectors @ 28 psi with no problems.