Knock Sensor pictures of LT1 16188051 and 16181333

[EagleMark]

Someone was asking for pictures of the knock sensor inside the 94 95 LT1 PCM. Well here they are.

Not sure if they are same as 96-97 LT1 PCM which are the same, but run OBDII code and added a crank sensor, although the OptISpark distributor already did what the crank sensor was doing for SFI. Actually some 95 have both OBDI and OBDII trouble codes, I don't know if the operating system is same. Interesting system. I have always wanted to get a OBDII PCM and plug it into my car and see if I could flash a OBDI bin on it?

[Tunedperformance]

What is the part number on top of the knock module, it's hard to make out. Interesting !!

[EagleMark]

16177700

1055145

[Tunedperformance]

Is the 16177700 the first picture ? and not sure of the 1055145 what engine was that used in?

[EagleMark]

Both number were on the knock sensor. I opened the other PCM but the knock sensor was gone, was going to see if it had same numbers for you...

[Tunedperformance]

sorry, I misunderstood. I thought you were saying this was picture of two different knock modules The 16177700 is a Lt1

http://www.thirdgen.org/techboard/at...es-lt4-esc.jpg