Results 1 to 3 of 3

Thread: 2002 Tahoe/Yukon cal file request

  1. #1
    Fuel Injected!
    Join Date
    Feb 2013
    Posts
    30

    2002 Tahoe/Yukon cal file request

    Hey guys,

    I need a stock calibration file for a 2002 yukon/tahoe with the following specs:

    lm7
    drive by wire
    4l60e

    I have found some files here on gearhead that have been close, but now quite what I need. If anyone has a file that hits the above marks that would be great.

    So I looked through three files that I found in the forum, but ran into some issues.
    1. 2002 Tahoe lm7 .cal's weren't ETC enabled. Question - can I just turn ETC on in the applied options matrix to enable ETC, or is it more involved than that?
    2. I found a file called "2002TahoeStock.cal" and it has ETC, but its an L59 tune so the injector flow rate isn't the same as the lm7 equipped Tahoe I intend to run the PCM in. Question - can I simply turn the "flex fuel compatible" option off in the calibration options/switches, then adjust the flow rate tables to match the rates that are given for the the lm7 injectors, or is there more to it than that?

    Thanks for any help.

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,264
    The attached is 2002 Yukon L59 .cal file I modified for an Off Road Only LM7 DBW.

    dave w

  3. #3
    Fuel Injected!
    Join Date
    Jun 2014
    Posts
    229
    Try this one ...

Similar Threads

  1. Does anyone have a file? 2002 Express Van 5.7
    By 96HawkCnvt in forum TunerCat OBDII
    Replies: 3
    Last Post: 11-03-2015, 02:20 PM
  2. 2002 L59 with DBC bin file?
    By turbo_bu in forum TunerPro OBDII
    Replies: 12
    Last Post: 03-10-2015, 11:35 PM
  3. File Request 96 LT1
    By Playtoy_18 in forum OBDII Tuning
    Replies: 1
    Last Post: 10-18-2013, 01:17 AM
  4. File request
    By Playtoy_18 in forum OBDII Tuning
    Replies: 14
    Last Post: 03-13-2013, 07:11 AM
  5. File Request.
    By Hog in forum OBDII Tuning
    Replies: 8
    Last Post: 03-04-2013, 01:49 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •