Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 3 of 3

Thread: does this ecm have a limp mode 16196285 - bin BMZX $36.xdf a269.adx

  1. #1
    Electronic Ignition!
    Join Date
    Apr 2016
    Age
    44
    Posts
    12

    does this ecm have a limp mode 16196285 - bin BMZX $36.xdf a269.adx

    help

    brand new engine with some performance mods and its a pig ... cant get out of its own way ... granted its a 4 cyl but its 100 times worse then the other car we have with the same setup

    my first question is is there a limp mode on this ECM ... the new oil pan we used did not have the Oil Level Sensor hole so we have that unplugged at the moment ... oil pressure is fine (i'm assuming as i cant find a pressure reading from the adx i have ... but i see good flow at the rockers)

    i just took it out and got some data logged but i'm wondering if it could be something that simple, before i blame the tune ... this tune ran great with the old block

    its a 1995 chevy cavalier with the 2.2 OHV built for circle track

  2. #2
    Fuel Injected!
    Join Date
    Oct 2013
    Posts
    732
    If you're data logging then it's not in limp-mode.

    Any bad sensor data or codes?

  3. #3
    Electronic Ignition!
    Join Date
    Apr 2016
    Age
    44
    Posts
    12
    decided to pull the plugs to do a compression test which was perfect ... but then i noticed one of the plugs looked brand new, so i checked spark and that was good ... checked duty cycle at the injector plug and that was good

    so i swapped out the injector and now its golden

    never thought of the injectors because they were all brand new in the box when i built the engine

Similar Threads

  1. 7060 4l80e limp mode
    By myburb in forum GM EFI Systems
    Replies: 0
    Last Post: 11-05-2014, 10:13 PM
  2. 16196285 BIN, $36 XDF, and *.adx
    By angleton in forum TunerPro Tuning Talk
    Replies: 7
    Last Post: 03-17-2014, 04:41 PM
  3. What would cause a ECM?PCM to go into limp mode?
    By Woods in forum GM EFI Systems
    Replies: 1
    Last Post: 03-15-2014, 07:40 PM
  4. TPI in limp mode
    By Z1LE in forum GM EFI Systems
    Replies: 8
    Last Post: 04-23-2013, 01:33 PM
  5. 16147060 transmission "limp mode"
    By Drac0nic in forum GM EFI Systems
    Replies: 14
    Last Post: 09-12-2012, 07:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •