Results 1 to 3 of 3

Thread: Need help with TunerPro and Autoprom 7747 ECM

  1. #1
    Fuel Injected!
    Join Date
    Apr 2016
    Posts
    27

    Need help with TunerPro and Autoprom 7747 ECM

    I'm running the latest version of TP and I have the Autoprom but I can't get it to datalog. I can get it to manually read a chip placed in the Autoprom but I can not get TP to talk to the car.

    I *believe* I have it all set up correctly but am unsure. The data I'm getting shows all the gauges as fully pegged.

    I've been reading tutorials over and over but can't figure this out.

    Any help is appreciated.

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    What com port are you using?

    Maybe the USB driver needs to re-installed?

    dave w

  3. #3
    Carb and Points!
    Join Date
    Aug 2015
    Age
    45
    Posts
    8
    what do you mean you say it won't talk to the car. It shows in the left hand corner that you are connected to the autoprom. but there is no BIN or XDF selected but the ADX is.

Similar Threads

  1. AutoProm ADC Interface Channels Set up in TunerPro!
    By EagleMark in forum TunerPro Tuning Talk
    Replies: 43
    Last Post: 05-21-2018, 04:45 AM
  2. Replies: 1
    Last Post: 11-05-2015, 02:33 PM
  3. Moates Autoprom TunerPro RT Failing to Emulate
    By UglyBoost91 in forum GM EFI Systems
    Replies: 6
    Last Post: 03-30-2014, 10:25 PM
  4. Reading Stock GM Chips Burn 1, Burn 2, AutoProm TunerPro Flash and Burn
    By EagleMark in forum Fuel Injection Writeups Articles and How to New and Old
    Replies: 0
    Last Post: 01-27-2013, 08:15 AM
  5. TunerPro Connection issue 7747 $42
    By ninerscout in forum TunerPro Tuning Talk
    Replies: 14
    Last Post: 03-31-2012, 05:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •