i have 5.7l turbo tpi with a 16197427 ecm modified for mpfi what bin to start with i want it to stay in open loop all the time
i have 5.7l turbo tpi with a 16197427 ecm modified for mpfi what bin to start with i want it to stay in open loop all the time
Last edited by Aholt91ss; 04-24-2016 at 05:52 PM.
Changing the Temperature for Closed Loop to 151 Celsius will set "Open Loop" all the time.
dave w
what about disabling iac like set to zero all the time and using a 3 bar map
Why would you want to disable the IAC? It controls the idle, decel and even accel.
Also $0D is not capable of using a 3 BAR MAP sensor properly and unless you know how to edit the source code well, will likely give you issues. If you want to use a 3 BAR MAP, I suggest using $59 in a '7749/'7730 and using the '7427 for trans control only.
The man who says something is impossible, is usually interrupted by the man doing it.
i have a 1227727 ecm do you think this will work i dont need trans control
If you're running $8d in a '7727, you can use S_AUJP v5 which allows setting an RPM at or below which OL will be invoked,. So if want to only use OL for idle, set OL RPM say to 1000, or if want OL all the time, set RPM to 8000. Nothing else to do! S_AUJP V5 here: http://www.gearhead-efi.com/Fuel-Inj...27749-v-S_AUJP, Post #3.
HTH
Bookmarks