Can somebody ID this bin?

[cs641]

I bought a prebuilt TBI system. I plugged the chip into my autoprom and downloaded it.

After looking at the BIN file I noticed the SA for timing is set at 81*

I've also had problems data logging this computer and getting wacky numbers.

7747 ECM

I've attached the BIN.

[1project2many]

Bithoist doesn't recognize it. Says the mask ID is 7D which is a strange one. What number chip? How many pins on the chip?? Maybe a bad read??

[fastacton]

Very well could be a bad read or a failed burn to the chip. Using $42 to look at it, the VE table is wacky too. I'd double check all the settings and try to read it again, but it might be just junk.

[cs641]

Had the settings way off.

Should be a readable one attached now

[1project2many]

Yep... better.

Here is the results of your BCC/Chip/Bin file!

Processing file gest.bin


File 'gest.bin'
Address: 0xd000,0xdfff
CRC: 0xaf19e52c
Mask ID: 42
ID byte: 0xAA (should be 0x42)
Sum word: 0x8df0 (should be 0x8d88)
Scan ID: 7941
BCC: BDR4376
BCC: ABUL8235

FYI you can check files here:
http://www.gearhead-efi.com/bithoist/query.php

[cs641]

I'm having trouble datalogging. I can get my computer to talk to the car but the #'s I'm getting back are weird. Over 13,ooo% duty cycle on injectors, tach is pegged, other gauges unresponsive.

I'm running the latest version of TunerPro and connecting with the Moates AutoProm.

Using these files

$42-1227747-V5.9.3.xdf

$42-1227747-V5.2.adx

What am I doing wrong?