convert tun to bin

[2ss8]

How can I convert a tun to a bin.?

[Lextech]

Post your .tun and I will give it a try.

Jeff

[2ss8]

Here is it

[Lextech]

It figures. You post a 1mb tune that I don't have the stuff with me to do it today. I will have to do it in the morning. If it was a 512kb, I could do it now.

Jeff

[2ss8]

No problem Jeff. Give it a try in the morning.

[Lextech]

Here is the .tun file you provided converted to .bin

Jeff

[dave w]

Here is it

Maybe the attached .bin will help? It's from a different 2004 / 5.3 Liter (L59) / 4l60e 1Meg with the same OS as the .tun posted.

[okay]

Hello Good Day My Dear
please can you convert tis file to bin
information : engine LS1 5.7 V8 4l60e

Here is it
Attachment 10710


​Thank you Jeff.

[LRT]

There are two 2002 Express van bins here:

http://www.gearhead-efi.com/Fuel-Inj...ll=1#post18585

One is a 4L60, the other is a 4L80.

[dave w]

Hello Good Day My Dear
please can you convert tis file to bin
information : engine LS1 5.7 V8 4l60e

Here is it
Attachment 10710


​Thank you Jeff.

I am thinking the 2002 Express would have the L31 5.7 Liter engine, not the LS1 5.7 Liter engine? Maybe there is a typo (S instead of 3)?

dave w

[okay]

There are two 2002 Express van bins here:

http://www.gearhead-efi.com/Fuel-Inj...ll=1#post18585

One is a 4L60, the other is a 4L80.

I am thinking the 2002 Express would have the L31 5.7 Liter engine, not the LS1 5.7 Liter engine? Maybe there is a typo (S instead of 3)?

dave w

thank you LRT for quick answer but all of that is coded by tunerpro software
and Mr dave w you are right

I want that file for ls1 pcm and i found bin file for ls1 and i programed directly to the chip but engine does not run
my problem is VATS ,Car starts and immediately dies

I have raw bin file and I don't have hptuners and efilive interface , i cant buy that
If i have another way to disable that security system please tell me
I thinking i need raw bin file that VAT was disabled
I transplants engine and now does not run
If you can please help me
here is my pcm file
Attachment 10713

Many Thanks

[LRT]

The tune that you attached to post #13 is corrupt, as is the bin that you attached to post #16.

I would not recommend using either of these.

What are you using to flash the PCM ?

What exact engine and transmission combination do you have ?

Better to answer these questions first, and then perhaps we can find a way to provide help that is actually useful.