Thanks for the pictures, very helpful.
So you are reading the ECU using OBD-2 correct?
I don't think OBD2 will read/write a tunerlocked ECU, taht needs BDM to access the flash. Have you tried the BDM function? You need to open the ECU and solder some wires to the board.
Where does one aquire this cable? Im guessing the $50 ebay ones are not going to work.
Oh, they work. But the price barely covers the components that you will receive. What you will also receive are viruses and Trojans. The most well known of these is the LPK.dll.Originally Posted by mecanicman
I looked at these as an option when the Antus "free" flashing tool, turned out to be a read-only teaser tool.
Last edited by LRT; 04-03-2016 at 10:21 PM.
the disk i received with my chinese clone was clean of "bugs" but can't seem to read anything(have tried it on several ecms now) think that may be a win7 thing, putting xp on an old laptop now.(had to go to the flea mkt, turns out i didn't have a laptop that would run xp...........)
however i would not consider putting the software on anything that can connect to the web........................
What happens when the computer has internet access?
like i said the disk i received was clean of bugs and malware, but i have heard many stories of viruses and other creepy crawlies from disks distributed with chinese clones, best to keep such things contained............
cheap chinese Fgtech will not allow anti-virus programs, otherwise software will killed. no internet connection, cause firmware will die. if you did they told you and load sw on Winxp, it works OK,money well spent, 39.99US$ i bought mine
http://www.obd365.com/wholesale/new-...-function.html
Posting Permissions
Reply With Quote
Bookmarks