Reading E38 with FGtech V54 >>>>> (PICs)

**Alvin95** · 04-05-2016

cheap chinese Fgtech will not allow anti-virus programs, otherwise software will killed. no internet connection, cause firmware will die. if you did they told you and load sw on Winxp, it works OK,money well spent, 39.99US$ i bought mine
http://www.obd365.com/wholesale/new-...-function.html

**Montecarlodrag** · 04-05-2016

What about this one? is it also a clone or it's the real one?
http://www.eobdtool.com/2016-latest-...on-p-1643.html

**2ss8** · 04-05-2016

Both of them clone and mine clone.

If you want the original check this
http://www.fgtechnology.it

**Montecarlodrag** · 04-05-2016

I am very interested in this tool. I need to repair/unlock some E38's I have. Since they are corrupted or tunerlocked OBD communication is of no use, I need to use BDM to directly access the flash.
I asked several guys who repair those ECMs about what tools they use, but it's like I'm asking for the Holy Grail. Only 1 answered and politely told me to fu** off.
I have used BDM/Jtag tools in the past, it's no big deal, but it's a top secret it seems.

**roughneck427** · 04-08-2016

So the fgtech I got off eBay I could not read and of the tested ecms in the threads. I had updated the firmware in it via an online tutorial and it works great for bdm reads.

2ss8 gave me the link of the unit he bought I didn't update the firmware and used it strait out of the box not updating anything. I was able to read and write a 0411 ECM on the bench.