I have lots of things out of whack and could use some advice. I'd rather not bother Dave with my inexperance as i'm sure he has better things to do. Any advice or point in the correct direction would be very very much appreciated. Attached are a couple XDL logs from yesterday.
1991 5.7 5-speed T.B.I. ECM-1227747
$42.xdf
$42-1227747-V5.2.adx
Thanks!
wayne
Last edited by SRTVENOM; 04-01-2016 at 09:55 AM.
What exactly shall I look for in your logs, so, what symptoms are you experiencing?
The problems I'm having is the truck dies at idle and while holding a higher rpm (to keep it from dyeing) throttle position. Seems to lose spark when wanting to die. I sometimes can feather the throttle and keep it from dyeing, but only for a very short time. I believe I have a couple problems I’m trying to nail down.
Last edited by SRTVENOM; 04-01-2016 at 03:05 PM.
You've got an error 51 for the PROM. Re-seat the chip or burn a new one and try again.
1973 K-5 Blazer, TBI 350, TH400, 1 ton axles & 38" SSRs'
1975 280Z, TBI 350, 700R4
1953 M-38A1, TBI Buick 231
1951 Ford Panel, 5.3 with 4L80E
Posting Permissions
Reply With Quote
Bookmarks