Results 1 to 15 of 16

Thread: Getting started

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected!
    Join Date
    Jul 2013
    Age
    34
    Posts
    98

    Getting started

    Ok, so many of you may or may not know that i have installed a chevy 350 in a mazda miata with 2 eaton m90's strapped to it.

    i have a 16196395 computer, moates g1 adapter, a N/A chip from mark, BURN2 unit, and an ALDL cable.

    A little background about the engine:
    Crate chevy 350/330hp
    http://www.summitracing.com/parts/nal-19210008

    blew it up, rebuilt it, converted it to TBI and added 2 blowers to it

    No smog stuff, and no a/c ..... just the necessities to make it run [IACV, MAP, TPS, Coolant Temp, Oil Pressure]

    t5 manual transmission

    Right now it is on a 350 throttle body and 350 injectors..... believe its 61pph..... removed the OEM regulator and installed an aftermarket unit so i can adjust it.

    2 bar map sensor

    wideband o2

    I now think that i am ready to begin tuning. The car runs and drives but i do NOT want to take it into boost until i know what im looking at and everything looks good.

    I have tunerpro installed on my laptop and have no clue where to start at especially with boost in play. I have marks bin file loaded from the chip he burned for me.
    I have watched some videos on youtube about tunerpro, but that still doesn't put me in the neighborhood of where i need to be at.... i learn fast so if you guys can explain things, ill post pictures and give you detailed information on how the car is running and what the wideband is saying.

    Thank you so much for your help and this shall be a fun experience :D

    PS: I do not have chips YET, but can i run a "tune" via the laptop without ostrich or chip swapping just to see how the car would react or would i need to burn chips every single time?
    Last edited by Shawn1989; 03-28-2016 at 12:01 AM.

Similar Threads

  1. Help Get me Started
    By edfiero1 in forum GM EFI Systems
    Replies: 4
    Last Post: 04-06-2015, 07:33 PM
  2. Trying to get started
    By rmcilwain in forum Introductions
    Replies: 1
    Last Post: 01-03-2015, 08:50 PM
  3. just getting started
    By monte7218 in forum Introductions
    Replies: 1
    Last Post: 02-07-2014, 04:53 AM
  4. need help to get started.
    By streetrod56 in forum GM EFI Systems
    Replies: 12
    Last Post: 06-24-2013, 07:56 PM
  5. Getting Started
    By bcowboy in forum Introductions
    Replies: 0
    Last Post: 08-11-2012, 06:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •